iodolo_bg

iimveliso

I-DS90UB914ATRHSRQ1 yoqobo yeBrand entsha ye-QFN DS90UB914ATRHSRQ1 Nomthengisi PHINDA UQINISEKISE IZIBONGO ZOKUTHENGA

inkcazelo emfutshane:

Isixhobo se-DS90UB914A-Q1 sinikezela nge-FPD-Link III i-interface kunye neshaneli ehamba phambili ehamba phambili kunye ne-bidirectional channel control control for transmission data over a single coaxial cable or differential pair.Isixhobo se-DS90UB914A-Q1 sibandakanya ukubonakaliswa okwahlukileyo kuzo zombini iitshaneli ezihamba phambili ezihamba phambili kunye neendlela zokulawula i-bidirectional channel data.I-deserializer ijoliswe kuqhagamshelo phakathi kwemifanekiso kunye nabaqhubekekisi bevidiyo kwi-ECU (iYunithi yoLawulo loMbane).Esi sixhobo sikufanele ukuqhuba idatha yevidiyo efuna ukuya kuthi ga kwi-12-bit ye-pixel ubunzulu kunye nemiqondiso emibini yongqamaniso kunye nebhasi yesitishi sokulawula i-bidirectional.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zeMveliso

UHLOBO INKCAZO KHETHA
Udidi IiSekethe eziDityanisiweyo (ICs)

Ujongano

Ii-serializers, ii-Deserializers

 

 

 

Mfr Texas Instruments  
Uthotho Iimoto, AEC-Q100  
Iphakheji Iteyiphu & neReel (TR)

Sika iTape (CT)

Digi-Reel®

 

 

 

Ubume beMveliso Iyasebenza  
Umsebenzi I-Deserializer  
Data Rate 1.4Gbps  
Uhlobo Longeniso FPD-Link III, LVDS  
Uhlobo Lwemveliso LVCMOS  
Inani lamagalelo 1  
Inani leZiphumo 12  
Voltage - Unikezelo 1.71V ~ 3.6V  
Ubushushu bokusebenza -40°C ~ 105°C (TA)  
Uhlobo lokuNqamisa INtaba engaphezulu  
Ipakethe / Ityala I-48-WFQFN eveziweyo yePad  
Supplier Device Package 48-WQFN (7x7)  
Inombolo yeMveliso esisiseko I-DS90UB914  
SPQ 1000PCS  

 

I-Serializer/Deserializer (i-SerDes) yipere yeebhloko ezisebenzayo ezisetyenziswa ngokuqhelekileyo kunxibelelwano lwesantya esiphezulu ukuhlawula igalelo/imveliso elinganiselweyo.Ezi bloko ziguqula idatha phakathi kwedatha ye-serial kunye nojongano oluhambelanayo kwicala ngalinye.Igama elithi "SerDes" libhekisa ngokubanzi kunxibelelwano olusetyenziswa kwiitekhnoloji ezahlukeneyo kunye nokusetyenziswa.Usetyenziso oluphambili lwe-SerDes kukubonelela ngokuhanjiswa kwedatha kumgca omnye okanye aisibini esahlukileyoukuze kuncitshiswe inani lezikhonkwane ze-I/O kunye neziqhagamshelo.

 

Umsebenzi osisiseko we-SerDes wenziwa ngeebhloko ezimbini ezisebenzayo: ibhloko yeParallel In Serial Out (PISO) (aka Parallel-to-Serial converter) kunye ne-Serial In Parallel Out (SIPO) block (aka Serial-to-Parallel converter).Kukho ii-SerDes ezahlukeneyo ze-architectures: (1) Iwotshi enxuseneyo i-SerDes, (2) I-SerDes yewotshi eEmbedded, (3) 8b/10b SerDes, (4) i-Bit interleaved SerDes.

I-PISO (Igalelo Elinxuseneyo, Igalelo Lothotho) ibhloko iqhele ukuba negalelo lewotshi enxuseneyo, iseti yelayini yongeniso lwedatha, kunye neentambo zedatha yokufaka.Inokusebenzisa yangaphakathi okanye yangaphandleI-loop evaliweyo ngesigaba (PLL)ukuphinda-phinda ikloko ehambelanayo engenayo ukuya kumaza othotho.Eyona ndlela ilula yePISO inomnyeirejista yeshiftiefumana idata enxuseneyo kanye ngewotshi nganye enxuseneyo, kwaye iyisuse ngesantya esiphezulu sewotshi.Umiliselo lunokuthi lusebenzise akabini-bufferedbhalisa ukuze uphepheukuqinaxa uhambisa idatha phakathi kweendawo zewotshi.

I-SIPO (i-Serial Input, i-Parallel Output) ibhloko idla ngokufumana i-clock output, isethi yemigca yokuphuma kwedatha kunye neentambo zedatha yemveliso.Iwotshi yokufumana inokuba ifunyenwe kwidatha ngothothoukubuyisela iwotshiubuchule.Nangona kunjalo, ii-SerDes ezingathumeli iwotshi yokusetyenziswa kwewotshi ukutshixa i-PLL kwi-Tx frequency echanekileyo, ukuthintela ukwehla.Izandi ze-harmonicekhoyo kwiumjelo wedatha.Ibhloko ye-SIPO ke yahlula-hlula iwotshi engenayo phantsi kwireyithi ehambelanayo.Uzalisekiso lukholisa ukuba neerejista ezimbini eziqhagamshelwe njengesithinteli esiphindiweyo.Enye irejista isetyenziselwa ukuwohloka kuthotho lomlambo, kwaye enye isetyenziselwa ukubamba idatha yecala elicothayo, elinxuseneyo.

Ezinye iindidi zee-SerDes ziquka ii-encoding/decoding blocks.Injongo yolu guqulelo lwekhowudi/ukuguqulwa kwekhowudi kukubeka noko imida yamanani kumyinge wotshintsho lomqondiso ukuvumela lula.ukubuyisela iwotshikumamkeli, ukunikaukwenza isakhelo, kunye nokubonelelaIbhalansi yeDC.

Iimpawu eziphambili zeDS90UB914A-Q1

  • Ufanelekile kwizicelo zeemoto AEC-Q10025-MHz ukuya kwi-100-MHz yeNkxaso yeClock yePixel yoNgeniso
    • Iqondo lobushushu lesixhobo kwibanga lesi-2: -40℃ ukuya +105℃ uluhlu lobushushu obusebenzayo kwindawo
    • Isixhobo se-HBM ESD inqanaba lokuhlelwa ±8kV
    • Isixhobo CDM ESD ukuhlelwa kwinqanaba C6
  • Ukuhlawulelwa kwedatha ecwangcisekileyo:Umjelo oqhubekayo we-latency ephantsi yolawulo lwe-bidirectional control enenkxaso ye-I2C kwi-400-kHz
    • I-10-bit Payload ukuya kuthi ga kwi-100-MHz
    • I-12-bit Payload ukuya kuthi ga kwi-75-MHz
  • 2:1 I-Multiplexer yokukhetha phakathi kwemifanekiso emibini yegalelo
  • Iyakwazi ukufumana ngaphezulu kwe-15-m ye-coaxial okanye i-20-m ekhuselweyo yeentambo ezijijekileyo
  • Ukusebenza okunamandla-Over-Coaxial (PoC).
  • Fumana i-equalizer ilungelelanisa ngokuzenzekelayo utshintsho kwilahleko yentambo
  • I-LOCK i-pin yengxelo yesiphumo kunye ne-@SPEED BIST inqaku lokuxilongwa ukuze uqinisekise ingqibelelo yekhonkco
  • Umbane omnye kwi-1.8-V
  • I-ISO 10605 kunye ne-IEC 61000-4-2 ESD iyahambelana
  • Unciphiso lwe-EMI/EMC olunocwangco olucwangcisiweyo (SSCG) kunye neziphumo ezimandundu zomamkeli

Inkcazelo ye-DS90UB914A-Q1

Isixhobo se-DS90UB914A-Q1 sinikezela nge-FPD-Link III i-interface kunye neshaneli ehamba phambili ehamba phambili kunye ne-bidirectional channel control control for transmission data over a single coaxial cable or differential pair.Isixhobo se-DS90UB914A-Q1 sibandakanya ukubonakaliswa okwahlukileyo kuzo zombini iitshaneli ezihamba phambili ezihamba phambili kunye neendlela zokulawula i-bidirectional channel data.I-deserializer ijoliswe kuqhagamshelo phakathi kwemifanekiso kunye nabaqhubekekisi bevidiyo kwi-ECU (iYunithi yoLawulo loMbane).Esi sixhobo sikufanele ukuqhuba idatha yevidiyo efuna ukuya kuthi ga kwi-12-bit ye-pixel ubunzulu kunye nemiqondiso emibini yongqamaniso kunye nebhasi yesitishi sokulawula i-bidirectional.

I-deserializer ifaka i-multiplexer ukuvumela ukhetho phakathi kwemifanekiso emibini yokufaka, enye iyasebenza ngexesha.Uthutho lwevidiyo oluphambili luguqula i-10-bit okanye i-12-bit yedatha kwi-serial ye-serial stream enye enesantya esiphezulu, kunye ne-low latency ephantsi yolawulo lwe-bidirectional yothutho lwesiteshi esamkela ulwazi lolawulo oluvela kwi-port ye-I2C kwaye izimeleyo kwixesha levidiyo elingenanto.

Ukusebenzisa itekhnoloji yewotshi efakwe kwi-TI ivumela unxibelelwano olupheleleyo lwe-duplex olucacileyo ngaphezulu kwesibini esihlukeneyo, ephethe ulwazi lwetshaneli yokulawula i-asymmetrical-bidirectional.Lo mjelo omnye we-serial wenza kube lula ukudlulisa ibhasi yedatha ebanzi ngaphezulu kwetrayiti ye-PCB kunye nentambo ngokususa iingxaki ze-skew phakathi kwedatha ehambelanayo kunye neendlela zewotshi.Oku kusindisa kakhulu iindleko zenkqubo ngokunciphisa iindlela zedatha ezithi zinciphise iileya zePCB, ububanzi bentambo, kunye nobukhulu bokudibanisa kunye nezikhonkwane.Ukongeza, amagalelo e-Deserializer abonelela ngokulinganisa okuguquguqukayo ukuhlawulela ilahleko evela kumajelo eendaba kumgama omde.I-DC-balanced encoding/decoding isetyenziselwa ukuxhasa i-AC-coupled interconnects.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi